أعضاء هيئة التدريس - جامعة بنها
Ahmed H Bayoumy, Ayman A Nada, Said M Megahed, 2013, "Use of Forward Dynamics Model for Designing Large-Size Wind Turbine Blades", ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA, November 15–21, 2013. Proc. ASME. 56253; Volume 4B: Volume 4B: Dynamics, Vibration and Control, IMECE2013-64309
• 2013
معلومات البحث
المؤلفون
Ahmed H Bayoumy, Ayman A Nada, Said M Megahed
الكلمات المفتاحية
Not Available
المجلة العلمية
Not Available
الناشر
Not Available
المجلد
Not Available
العدد
Not Available
الصفحات
Not Available
publication.type
International
رابط البحث
Open Link
المواد المرفقة
Not Available
الملخص
In this paper, the Blade Element Momentum (BEM) theory is used to design the
horizontal wind turbine blades. The design procedure concerns the main parameters of the
axial/angular induction factors, chord length, twist/attack angles, and local power/thrust
coefficients. These factors in turns affect the blade aerodynamics characteristics and
efficiency at the corresponding nominal speed. NACA 4-digits airfoil geometry is obtained,
using BEM theory, to achieve the maximum lift to drag ratios. The optimization of the ...
horizontal wind turbine blades. The design procedure concerns the main parameters of the
axial/angular induction factors, chord length, twist/attack angles, and local power/thrust
coefficients. These factors in turns affect the blade aerodynamics characteristics and
efficiency at the corresponding nominal speed. NACA 4-digits airfoil geometry is obtained,
using BEM theory, to achieve the maximum lift to drag ratios. The optimization of the ...