Staff Members - Benha University
Ahmed H Bayoumy, Ayman A Nada, Said M Megahed, 2013, "Use of Forward Dynamics Model for Designing Large-Size Wind Turbine Blades", ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA, November 15–21, 2013. Proc. ASME. 56253; Volume 4B: Volume 4B: Dynamics, Vibration and Control, IMECE2013-64309
• 2013
Publication Information
Authors
Ahmed H Bayoumy, Ayman A Nada, Said M Megahed
Keywords
Not Available
Journal
Not Available
Publisher
Not Available
Volume
Not Available
Issue
Not Available
Pages
Not Available
publication.type
International
Paper Link
Open Link
Supplementary Materials
Not Available
Abstract
In this paper, the Blade Element Momentum (BEM) theory is used to design the
horizontal wind turbine blades. The design procedure concerns the main parameters of the
axial/angular induction factors, chord length, twist/attack angles, and local power/thrust
coefficients. These factors in turns affect the blade aerodynamics characteristics and
efficiency at the corresponding nominal speed. NACA 4-digits airfoil geometry is obtained,
using BEM theory, to achieve the maximum lift to drag ratios. The optimization of the ...
horizontal wind turbine blades. The design procedure concerns the main parameters of the
axial/angular induction factors, chord length, twist/attack angles, and local power/thrust
coefficients. These factors in turns affect the blade aerodynamics characteristics and
efficiency at the corresponding nominal speed. NACA 4-digits airfoil geometry is obtained,
using BEM theory, to achieve the maximum lift to drag ratios. The optimization of the ...