Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties Improving hydrogen embrittlement resistance of Hadfield steel by thermo-mechanical flash-treatment Studying Hydrogen Embrittlement in Nano-twinned Polycrystalline Fe-12.5 Mn-1.2 C Austenitic Steel The effect of deformation twins induced previously by cold rolling on the mechanical behavior of Hadfield steel Evolution of Fracture Mode in Nano-twinned Fe-1.1C-12.5Mn Steel Investigation of temperature variation during friction drilling of 6082 and 7075 Al-alloys Investigation of exhaust valve failure in a marine diesel engine Study on the Mechanical Performance of Dissimilar Butt Joints between Low Ni Medium-Mn and Ni-Cr Austenitic Stainless Steels Processed by Gas Tungsten Arc Welding Effects of increasing the strain rate on mechanical twinning and dynamic strain aging in Fe-12.5 Mn-1.1 C and Fe–24Mn-0.45 C–2Al austenitic steels Strengthening Contributions of Mechanical Twinning and Dislocations to the Flow Stress of Hadfield High-Manganese Steel: Quantitative Analysis Effects of Wall Thickness Variation on Hydrogen Embrittlement Susceptibility of Additively Manufactured 316L Stainless Steel with Lattice Auxetic Structures Metallurgical analysis of ASME SA213 T12 boiler vertical water-wall tubes failure Microstructural evolution and mechanical performance of two joints of medium-Mn stainless steel with low-and high-alloyed steels Optimization of Thermal Drilling Parameters of 6082 Al-Alloy Based on Response Surface Methodology Review on the Solid-State Welding of Steels: Diffusion Bonding and Friction Stir Welding Processes Metallurgical characterization of a failed A106 Gr-B carbon steel welded condensate pipeline in a petroleum refinery The effect of pre-drilling on the characteristics of friction drilled A356 cast aluminum alloy Studying the distribution of hardness values in friction drilled 7075 Al-alloy sheets at different conditions