“Modelling Induction Motors For Computing Transient Behaviour”, Proc. IEE, Vol. 126, No. 4, pp. 343-344, April 1979, England. “Steady-state Performance of a Group of Induction Motors”, Journal of Engineering and Applied Science, Cairo University, No. 3, pp. 289-299, June 1979, Egypt. “Simple Method For Evaluating Induction Motor Performance Following Supply Interruption”, Journal of Engineering and Applied Science, Cairo University, No. 4, pp. 45-52, August 1979, Egypt. “Simplified Analysis of The Single-phase AC Power Regulator For Series R-L Loads”, Journal of Engineering and Applied Science, Cairo University, No. 4, pp. 1-12, August 1979, Egypt. “Transient Performance of a Group of Induction Motors”, Electric Machines and Electromechanics Journal., Vol. 5, Issue 3, pp. 187-199, June 1980, USA. “Exact Analytical Solution of Induction Motor Equations Following Supply Disconnection”, Electric Machines and Electromechanics Journal, Vol. 5, Issue 4, pp. 323-330, September 1980, USA. “Computer-aided Analysis of Two Parallel Circuits Controlled by Thyristors”, Proc. of The Sixth Annual Operations Research Conference, pp. 85-93, February 1980, Zagazig University, Egypt. “Industrial Network Transients During Starting of Induction Motor Groups”, Intelect. 80, International Elect. Congress, March 1980, Egypt. “Computing Current Harmonics and Power of Thyristor-controlled Inductive Loads”, Journal of Engineering and Applied Science, Cairo University, No.1, pp. 209-220, February 1980, Egypt. “Variable-speed Solution For Evaluating Transient Components Following Starting of Induction Motors”, International Conference on Electrical Machines, Athens, September 1980, Greece. “Computing Transient Response of DC Motors Controlled by Thyristor Voltage Choppers”, Proc. of The Seventh Annual Operations Research Conference, pp. 90-99, February 1981, Zagazig University, Egypt. “Modelling of Rectifiers in Single-phase Rectifier Circuits”, International Conference on Applied Modelling and Simulation, Lyon, Vol.(2), pp. 162-165 , September 1981, France. “Analysis of Parallel Circuits Controlled by Thyristors With a Weak Supply”, Journal of Engineering and Applied Science, Cairo University, No.1, pp. 239-246, February 1981, Egypt. “Performance of Thyristor-controlled Universal Motors”, IEE International Conference on Electrical Machines-Design and Applications, pp. 141-145, 13-15 July 1982, London, England, UK. “A Model For a Group of Induction Motors”, Proc. of The Eighth Annual Operations Research Conference, Vol.(8), No.(1), pp. 763-770, February 1982, Zagazig University, Egypt. “Fast Method For Computing Transient Torque of 3-phase Induction Motors”, International Conference on Applied Modelling and simulation, Paris, pp.14-16, July 1982, France. “Performance of Solid-rotor Induction Motor Controlled by Thyristors”, International Conference on Elect. Machines, pp. 518-521, September 1982, Budapest, Hungary. “Time-constants and Frequencies of 3-phase Induction Motors Transient Components”, Proc. of The Ninth Annual Operations Research Conference, pp. 133-141, February 1983, Egypt. “Transient Performance of Inductive Load-Photovoltaic Converter System", Proc. of The Fourth IASTED International Symposium on Modelling and Simulation, pp. 301-303, June 1983, Lugano, Switzerland. “Transient Components of Chopper-fed DC Series Motor”, Proc. of The Fourth IASTED International Symposium on Modelling and Simulation, pp. 319-323, June 1983, Lugano, Switzerland. “Effect of Supply Reactance on The Controllable 3-phase Bridge Rectifier Operation” Proc. of The Third IFAC Symposium on Control in Power Electronics and Electrical Drives, pp. 151-158, September 1983, Lausanne, Switzerland. “Closed-form Solution of Rectifier and Controlled Rectifier Circuits Feeding Inductive Loads”, AMSE Review, Vol.1, No. 1, pp. 21-35, February 1984, France. "Effect of Speed on Terminal Voltage of Thyristor-controlled Induction Motors”, Journal of Engineering and Applied Science, Cairo University, Vol. (12), No.(1), pp. 201-210, February 1984, Egypt. “Approximate Equivalent Circuit For Small Solid-rotor Induction Motors”, IEE Proceedings, Vol. 131, Pt. B, No. 2, pp. 70-72, March1984, England. “Analytical Method For Evaluating Transient Performance of DC Series Motors”, International Conference on Electrical Machines, pp. 619-622, September 1984, Lausanne, Switzerland. “Closed-form Solution of Thyristor-controlled Separately- excited DC Motors”, International Conference on Electrical Machines, pp. 875-878, September 1984, Lausanne, Switzerland. “Simple Analytical Solution For AC Thyristor Controller Feeding Two Parallel Circuits”, Modelling, Simulation and Control, A , Vol. 4, No. 2, pp. 57-63, February 1985, France. “Performance Analysis of Parallel-connected Induction Motors Following Supply Disconnection”, Proc. of The Tenth Annual Operations Research Conference, Vol.(10), No.(1), pp.707-720, April 1985, Egypt. “Transient Components of Inverter-fed Induction Motors”, International Conference on Electrical Machines, pp. 975-977, Munich, September 1986, Germany. “Transients of Ideal AC Supply Feeding 3-phase Thyristor Bridge With Inductive Loads”, Modelling, Simulation and Control, A, Vol. 16, No. 2, pp. 1-6, February 1988, France. “Closed-form Solution for Load Characteristics of The Non-ideal Supply Fed 3-phase Thyristor Bridge” Modelling, Simulation and Control, A, Vol. 23, No. 2, pp. 53- 63, February 1989, France. “Closed-form Solution For Supply Characteristics of The Non-ideal Supply Fed 3-phase Thyristor Bridge”, Modelling, Simulation and Control, A, Vol. 23, No. 2, pp. 15- 25, April 1989, France. “Closed-form Solution For Load Characteristics of 3-phase Thyristor Regulators Feeding Inductive Loads”, Modelling, Simulation and Control, A, Vol. 24, No. 3, pp. 41-49, May 1989, France. “Simple Mathematical Expression For The Extinction Angle of 3-phase Thyristor Regulators Feeding Inductive Loads”, Modelling, Simulation and Control, A, Vol. 24, No. 3, pp. 51-62, May 1989, France. “Full Analysis of Performance of 3-phase Fully-controlled Bridge Rectifiers Feeding Static Active Loads”, etz Archiv, European Transactions on Electrical Power Engineering, Vol. 12, pp. 187-192, December 1990, Germany. “Performance of Current-source Inverter Fed Induction Motor Under Field-orientation Control”, Proceedings of The Sixth Conference on Power Electronics and Motion Control (PEMC), pp. 734-738, October 1990, Budapest, Hungary. “State-variable Analysis of 3-phase Fully- controlled Bridge Rectifiers”, Modelling, Simulation and Control, A, Vol. 32, No. 2, pp. 53-62, February 1991, France. “Analysis of Performance of a 3-phase Fully-controlled Bridge Rectifiers Feeding a DC Motor”, Modelling, Measurement and Control, Series A, Vol. 43, No. 2 , pp. 1-13, February 1992, France. “Transient Performance of VSI-Induction Motor System”, Journal of Engineering and Applied Science, Cairo University,Vol.39, No.6, pp. 1237-1249, December 1992, Egypt. “Effect of Instant of Switching on the Transient Performance of VSI-Induction Motor System” Modelling, Measurement and Control Journal, series A, Vol. 48, Issue 1, pp. 35-44, February 1993, France. “Effect of Supply Inductance and Terminal Capacitors on the Characteristics of a Group of Induction Motors”, Modelling, Measurement and Control, Series A, Vol. 52, No. 4, pp. 3-16, August 1993, France. “Equivalent Circuit For Small Solid-Rotor Induction Motors Fed From a Non-Sinusoidal Supply”, ETEP Journal (European Transactions on Electrical Power), Vol. 4, No. 3, pp. 237-241, May/June 1994, Germany. “Performance of Three-phase Fully-controlled bridge Rectifiers With Non-ideal Supply Feeding Static Active Loads” , ETEP Journal (European Transactions on Electrical Power), Vol. 4, No. 4, pp. 269-276, July/August 1994, Germany. “Performance of a Three-phase Induction Motor Fed From a Nonideal Single-phase Supply”, ETEP Journal (European Transactions on Electrical Power), Vol. 5, No. 3, pp. 215-220, May/June 1995, Germany. “Closed-Form Solution of a Three-Phase VSI Feeding a Three-Phase Static Inductive Load”, ETEP Journal (European Transactions on Electrical Power), Vol. 5, No. 4, pp. 279-284, July/August 1995, Germany. “Effect of Terminal Capacitors on The Transient Behaviour of a Group of Induction Motors with Nonideal Supply”, IEEE/IAS Conference, San Diego, California, pp. 2327-2332, October 1996, USA. “Switching and Reswitching Transients of a VSI-Fed Induction Motor”, Proceedings of the Fifth International Middle East Power Systems Conference (MEPCON97), pp. 281-285, Alexandria University, January 1997, Egypt. “Transient Performance of a Group of Induction Motors With Terminal Capacitors Following Supply Disconnection”, Electric Machines and Power Systems Journal, Vol. 26, Issue 3, pp. 235-247, June 1998, USA. “Direct Approach for the Analysis of Self-excited Induction Generators” Journal of Engineering and Applied Science, Cairo University,Vol.45, No.3, pp. 427-440, June 1998, Egypt. “A Simplified Approach to The Analysis of Short-shunt and Long-Shunt Self-excited Induction Generators”, Proceedings of the Sixth International Middle East Power Systems Conference MEPCON98), pp. 99-104, Mansoura University, December 1998, Egypt. “Effect of Cell Temperature on the Performance of a Photovoltaic Generator/DC Motor System”, Proceedings of the Sixth International Middle East Power Systems Conference (MEPCON98), pp. 706-710, Mansoura University, December 1998, Egypt. “A Novel Approach for the Analysis of Self-Excited Induction Generators”, Electric Machines and Power Systems Journal, Vol. 27, Issue 8, pp. 879-888, August 1999, USA. “Power Components and Power Factor of 3-Phase AC-DC Converters”, Proceedings of the Seventh International Middle East Power Systems Conference (MEPCON2000), pp. 16-21, Ain-Shams University, March 2000, Egypt. “Modelling and Simulation of VSI-Fed Induction Motors”, Proceedings of the Seventh International Middle East Power Systems Conference (MEPCON 2000), pp. 80-84, Ain-Shams University, March 2000, Egypt. “Performance Analysis of Switched Reluctance Motors”, Proceedings of the Seventh International Middle East Power Systems Conference (MEPCON 2000), pp. 169-174, Ain-Shams University, March 2000, Egypt. “Current and Power Components of Single-phase AC Thyristor Regulators” Modelling, Measurement and Control Journal, Series A, Vol. 74, Issue 4, pp. 1-16, 2001, France. “A Novel Approach For Steady-state Analysis of SEIG With Minimum Load Impedance”, Proceedings of the Eighth International Middle East Power Systems Conference (MEPCON2001), pp. 637-641, Helwan University, December 2001, Egypt. “Performance of Wind Turbine Self-excited Induction Generator Systems” Journal of Engineering and Applied Science, Vol. 49, No. 5, pp.897-911, October 2002, Egypt. “A Closed-form Analytical Model and Simulation of Switched Reluctance Motors” Engineering Research Journal, Benha University, No. 4, pp. 51-68, June 2005, Egypt. “Closed-form Solution for the Performance Characteristics of a Photovoltaic Array/DC Motor System”, Electric Power Components and Systems, Vol. 38, Issue 1, pp. 33-49, January 2010, USA. “Simulation of DC Motors Fed from Photovoltaic Arrays”, Modelling, Measurement and Control Journal, Series A, Vol. 82, Issue 4, pp. 17-28, October 2009, France. “An Approach for Determination of the Parameters of a Photovoltaic Module”, Modelling, Measurement and Control Journal, Series A, Vol. 82, Issue 3, pp. 69-78, July 2009, France. "Modeling and Simulation of a Self-Excited Induction Generator/Inductive Load System", International Journal of Electrical and Power Engineering, Vol. 5, Issue 2, pp.92-101, April 2011. "Performance Characteristics of the Series Hybrid Electric Vehicle with Hybrid Mode", International Journal of Electrical and Power Engineering, Vol. 4, Issue 2, pp.96-104, April 2010. "Steady-State Performance of a Directly Connected PV Array/Six-Step VSI/Induction Motor System", International Journal of Electrical and Power Engineering, Vol. 4, Issue 2, pp.105-112, April 2010. "Modeling and Simulation of a Matrix converter/ Inductive Load System" Journal of Electrical Engineering, Vol. 12, Edition 1, pp. 27-36, March 2012. “Modeling and Simulation of a Matrix Converter/Induction Motor System”, International Journal of Electrical and Power Engineering, Vol. 5, Issue 5, pp. 193-202, October 2011. "Effect of Instant of a Switching on Current and Torque Peaks Following Connection of a Three-Phase Induction Motor to a Single-Phase Supply", Modelling, Measurement and Control Journal, series A, Vol. 57, Issue 3, pp. 17-26,1994, France. "Estimation of the Parameters of a Photovoltaic Module from Manufacturer Data", International Journal of Electrical and Power Engineering, Vol. 8, Issue 1, pp. 7-10, May 2014. "An Equivalent Circuit of a Matrix Converter with Passive or Active Loads", Journal of Electrical Engineering, Vol. 15, Edition 1, pp. 64-69, March 2015. "A Novel Approach for the Analysis of a Thyristor-Controlled Induction Motor", Journal of Electrical Engineering, Vol. 15, Edition 2, pp. 14-25, June 2015. "A Direct Analytical Approach For Determination of Operating Frequency of a Self-excited Induction Generator Feeding an Induction Motor", Journal of Electrical Engineering, Vol. 15, Edition 2, pp. 34-41, June 2015. "Effect of supply inductance on the performance of three-phase fully-controlled bridge rectifiers feeding static active loads", MODELLING MEASUREMENT AND CONTROL, AMSE Press, Series A, Vol. (48), No. (3), pp. 21-42, 1993, France. "Closed-Form Solution of a Three-Phase Voltage-Source Inverter Feeding a Three-Phase Induction Motor", Journal of Electrical Engineering, Vol. 16, Edition 2, pp. 45-52, June 2016. "A Direct Approach for Obtaining Steady-State Characteristics of a Doubly-Fed Induction Machine", Journal of Electrical Engineering, Vol. 16, Edition 4, pp. 498-504, December 2016.