|
Influence of Fuel Distribution and Heat Transfer on Energy Consumption in Tunnel Kilns
|
|
|
Flow Field Visualization to Simulate the Burning of Sanitaryware in Tunnel Kilns
|
|
|
Enhancement of Heat Transfer Characteristics through Pipes by Pulsating the Flow Downstream.
|
|
|
Experimental and Numerical Comparison between Fixed and Double Axial Photovoltaic Tracking System
|
|
|
CFD Simulation and Experimental Validation of Cross Flow Mixing in Body Center Cubic Packed Bed and Comparison with PMM
|
|
|
Augmentation of convective heat transfer in the cooling zone of brick tunnel kiln using guide vanes: An experimental study
|
|
|
Numerical investigation of heat transfer in annulus laminar flow of multi tubes-in-tube helical coil
|
|
|
Techno - Economic Study of Hybrid Renewable Energy System for Remote Area in Sinai
|
|
Thermal performance modeling of turbulent flow in multi tube in tube helically coiled heat exchangers
|
|
|
Effect of package spacing on convective heat transfer from thermal
sources mounted on a horizontal surface
|
|
|
Influence of contact point treatment on the cross flowmixing in a
simple cubic packed bed: CFD simulation and experimental validation
|
|
|
Thermal and hydraulic numerical study for a novel multi tubes in tube helically coiled heat exchangers: Effects of operating/geometric parameters
|
|
|
Thermal performance augmentation in the cooling zone of brick tunnel kiln with two types of guide vanes
|
|
|
Unloading characteristics of flights in a flighted rotary drum operated at optimum loading
|
|
|
Experimental investigation on the performance of a small reverse
osmosis unit
|
|
|
The Effect of Varying the Height of the Inlet and Outlet Vent on Fire Protection in NPPs
|
|
|
Computational Fluid Dynamics Simulation of Flow Mixing in Tunnel Kilns by Air Side Injection
|
|
|
Numerical investigations of convective heat transfer for lattice settings in brick tunnel Kiln: CFD simulation with experimental validation
|
|
|
Investigation of new waves in chemical engineering
|
|
|
Development and analysis of a novel CSP source driven cogeneration cycle for the production of electric power and low temperature refrigeration
|
|
|
Influence of using different tapered longitudinal section manifolds
in a Z shaped flat plate solar collector on flow distribution uniformity
|
|
Transient study during clay bricks cooking in the traditional kiln; CFD numerical study
|
|
Transient thermal behavior in brick tunnel kiln with guide vanes: Experimental study
|
|
Effect of R-600a and distilled water on nucleate pool boiling characteristics from horizontal tubes at low and moderate heat flux
|
|
|
Effect of surfaces roughness of a staggered tube bank in cross flow with air on heat transfer and pressure drop
|
|
|
Passive cooling of highly-concentrator triple-junction solar cell using a straight-finned heat sink: An experimental investigation
|
|
|
Numerical investigations of the performance of water-based nanofluid flow in conically coiled tube in tube heat exchangers: CFD simulation with experimental validation
|
|
Numerical and experimental study for heat transfer enhancement of cubical heat source and dummy elements inside rectangular duct
|
|
|
Experimental investigations on the thermal performance of an ice storage system using twin concentric helical coil
|
|
|
Investigating the performance of a water-based PVT system using encapsulated PCM balls: An experimental study
|
|
|
An Experimental Study on Solidification and Melting Processes of Ice-On-Bare U-Tube Copper Coil
|