Heat transfer characteristics of a slot/slots jet air impinging on a cylinder have been experimentally investigated for two different orientations of slot/slots jet plan with respect to cylinder axis. The experiments were carried out to study the effects of orientation of slot/slots jet plan with respect to cylinder axis on the rate of heat transfer from the cylinder. Two different jet–cylinder configurations were studied: (1) single slot jet aligned with cylinder axis (slot length = cylinder length), and (2) multiple slot jets equally spaces distributed orthogonal to cylinder axis (each slot length = cylinder diameter and sum of slots lengths = cylinder length). For each configuration, parametric effects of Reynolds numbers (Re) ranging from 1,000 to 10,000, dimensionless slot widths (W/d) ranging from 0.125 to 0.5, and dimensionless slot orifice-to-cylinder spacing (Z/W) ranging from 1 to 12 on local and average Nusselt numbers around cylinder surface have been investigated. The results showed that: (1) cooling the cylinder by multiple slots jets situated orthogonal to cylinder axis gave more uniform surface temperature distributions and higher heat transfer rate than the case of cooling the cylinder by single slot jet aligned with cylinder axis, (2) for both configurations the Nusselt number around the cylinder increased with increasing Re and W/d, and (3) for both configurations there was a certain Z/W in the range 4