Wasting water in toilets flushing is the largest source of water wasting through the use of old siphon boxes. It occupies the first place in domestic consumption. This study reports two trial approaches for optimizing the flushing system design. The first one employs a rotatable blade in the bottom of the bowl. This blade pushes materials in the bowl to cross the trapway thus; less toilet flushing water can be used. The second approach depends on using a rotatable trapway such that it can be tilted down to enable discharging materials in the bowl directly by its gravity. This facilitates the discharge and reduces the flushwater amount which is just used to overcome friction and to clean the passage. Both are mechanical systems actuated by an external pedal mechanism that triggers the water flushing valve system in the same time. Real experiments revealed that the first approach needs more developments to work efficiently. Experiments with restricted conditions revealed that with using the rotatable trapway system approach, less than one liter of flushwater is sufficient. The required flushwater flow rate can be obtained directly from the water supply system without the need to install siphon boxes. This study can help more to design better water saving systems.