Nickel Oxide Nanoparticles Modified Gold Electrode for Fractional Determination of Dopamine and Ascorbic Acid
Journal of Analytical Chemistry • 2018
معلومات البحث
المؤلفون
Mohamed I. Awada; B. A. AL Jahdaly; Mohammed A. Kassem, Omar A. Hazazi
الكلمات المفتاحية
nanoparticles, nickel oxide, electrocatalysis, electroanalysis, dopamine
المجلة العلمية
Journal of Analytical Chemistry
الناشر
Pleiades Publishing, Ltd
المجلد
73
العدد
12
الصفحات
1172–1178
publication.type
International
رابط البحث
Not Available
المواد المرفقة
Not Available
الملخص
Dopamine and ascorbic acid has been fractionally determined at nickel oxide nanoparticles (nanoNiO
x) modified polycrystalline gold electrode (poly-Au), nano-NiOx/Au, with high selectivity using voltammetric techniques. Nano-NiOx/Au electrode, fabricated electrochemically, could resolve the overlapping
obtained at the bare poly-Au electrode. Nano-NiOx/Au electrode was prepared by cycling of potential of Au
electrode in diluted Watts bath in the potential range between 0.0 and –1.0 V vs. Ag/AgCl (KCl sat.), and was
characterized morphologically and electrochemically. Effect of loading level of nickel was examined by
changing the number of potential cycles for the deposition of nickel nanoparticles, i.e., 1, 2 and 5 potential
cycles were used. Also the effects of the electrooxidation of the thus deposited nickel nanoparticles and pH of
the electrolyte on the voltammetric behavior were investigated. The good calibration curve of an acceptable
rectilinear range is obtained at nano-NiOx/Au electrode in which nano-Ni was prepared by two potential
cycles and subsequently electro-oxidized in KOH solution.
x) modified polycrystalline gold electrode (poly-Au), nano-NiOx/Au, with high selectivity using voltammetric techniques. Nano-NiOx/Au electrode, fabricated electrochemically, could resolve the overlapping
obtained at the bare poly-Au electrode. Nano-NiOx/Au electrode was prepared by cycling of potential of Au
electrode in diluted Watts bath in the potential range between 0.0 and –1.0 V vs. Ag/AgCl (KCl sat.), and was
characterized morphologically and electrochemically. Effect of loading level of nickel was examined by
changing the number of potential cycles for the deposition of nickel nanoparticles, i.e., 1, 2 and 5 potential
cycles were used. Also the effects of the electrooxidation of the thus deposited nickel nanoparticles and pH of
the electrolyte on the voltammetric behavior were investigated. The good calibration curve of an acceptable
rectilinear range is obtained at nano-NiOx/Au electrode in which nano-Ni was prepared by two potential
cycles and subsequently electro-oxidized in KOH solution.
أعضاء هيئة التدريس - جامعة بنها