Electrical and Electrochemical Behavior of Binary Li4Ti5O12–Polyaniline Composite
ournal of Inorganic and Organometallic Polymers and Materials • 2020
معلومات البحث
المؤلفون
M. Khairy, W. A. Bayoumy, K. Faisal,
E. E. Elshereafy & M. A. Mousa
الكلمات المفتاحية
Science
المجلة العلمية
ournal of Inorganic and Organometallic Polymers and Materials
الناشر
Springe
المجلد
30
العدد
Not Available
الصفحات
3158-3169
publication.type
Local
رابط البحث
Not Available
المواد المرفقة
Not Available
الملخص
Polyaniline (PANI), and nanocrystallites of pure Li4Ti5O12 (LTO) and V-doped Li4Ti5O12 (V-LTO) spinel structure have
been synthesized. The pure and doped Li4Ti5O12 was synthesized by solid-state reaction, whereas the samples containing
PANI were prepared by the in-situ oxidation polymerization method. As-prepared materials were characterized by XRD,
FT-IR and SEM techniques. The electrical and electrochemical properties were studied using impedance spectroscopy (EIS),
cyclic voltammetry (CV), galvanostatic charge–discharge methods (GCD) techniques. The doping of LTO with vanadium
caused marked changes in each of particle size, electrical conductivity, and electrical capacitance without any transforming
in the spinel crystal structure of the LTO material. Electrochemical studies showed that the specific capacitance of a hybrid
electrode built of the binary materials LTO and PANI is higher than that of its individual single material. It shows a specific
capacitance of 108 F/g, an energy density of 30 Wh/kg, and a power density of 2160 W/kg at 4 A/g as well as high cycling
performance, with 88.3% capacitance retained over 1000 cycles. The high electrochemical performance of the V-LTO/PANI
composite electrode can be attributed to the synergistic effects of the singular constituents and the enhancement of electronic
conduction in the hybrid electrode materials.
been synthesized. The pure and doped Li4Ti5O12 was synthesized by solid-state reaction, whereas the samples containing
PANI were prepared by the in-situ oxidation polymerization method. As-prepared materials were characterized by XRD,
FT-IR and SEM techniques. The electrical and electrochemical properties were studied using impedance spectroscopy (EIS),
cyclic voltammetry (CV), galvanostatic charge–discharge methods (GCD) techniques. The doping of LTO with vanadium
caused marked changes in each of particle size, electrical conductivity, and electrical capacitance without any transforming
in the spinel crystal structure of the LTO material. Electrochemical studies showed that the specific capacitance of a hybrid
electrode built of the binary materials LTO and PANI is higher than that of its individual single material. It shows a specific
capacitance of 108 F/g, an energy density of 30 Wh/kg, and a power density of 2160 W/kg at 4 A/g as well as high cycling
performance, with 88.3% capacitance retained over 1000 cycles. The high electrochemical performance of the V-LTO/PANI
composite electrode can be attributed to the synergistic effects of the singular constituents and the enhancement of electronic
conduction in the hybrid electrode materials.
أعضاء هيئة التدريس - جامعة بنها