publication.publication

“Water Vapour And Liquid Permeability Measurements In Mortar Samples”, Advances in Cement Research, Vol. 21, pp. 83-89.

2009

“Effect of simulated desert climate and sustained moderate temperature on some properties of concrete with and without polypropylene fibers”, Sustainable Construction Materials and Technologies, Coventry, UK 11-13 June 2007, pp. 437-445

2007

“Effect of loading level, cooling regime, polypropylene fibers, and coating type on the behavior of high strength concrete columns in fire”, Sustainable Construction Materials and Technologies, Coventry, UK 11-13 pp. 427-435.

2007

“A rapid and simple test scheme to assess the effect of fly ash on key properties”, Journal of the Faculty of Engineering-Mattaria, Helwan University, Vol. 102, pp. C1-C15

2005

“Modelling the Rapid Chloride Permeability Test”, Submitted to Cement and Concrete Research

2005

“Effect of steel fibers on the compressive and splitting tensile strength of normal, medium and high strength concrete”, 11th International Colloquium on Structural and Geotechnical Engineering”, Cairo-Egypt, May 17-19, E05MAT13.

2005

“Limitations in using non destructive tests for assessment of concrete subject to elevated temperature”, Journal of the Faculty of Engineering-Mattaria, Helwan University, Vol. 99, pp. C42-C60.

2005

“Fire resistance of internally or externally confined reinforced concrete columns”, CERM, Al Azhar University, Vol. 27, No. 2, pp. 459-473

2005

“Damage of silica fume and ground granulated blast furnace slag mortars due to heat cycles”, Ain Shams University, Faculty of Engineering Scientific Bulletin, Vol. 40, No. 4, pp. 135-152.

2005

“A new approach for controlling the slump loss in ready mixed concrete”, Journal of the Faculty of Engineering-Mattaria, Helwan University, Vol. 94, pp. C96-C112.

2004

«
1
2
3
»