أعضاء هيئة التدريس - جامعة بنها
SIX-PORT REFLECTOMETER STRUCTURE USING TWO MICROSTRIP THREE–SECTION COUPLERS
Scientific Bulletin, Ain Shams University, Faculty of Engineering • 2004
معلومات البحث
المؤلفون
A.S.Mohra
الكلمات المفتاحية
Three-section coupler, microstrip, six-port reflectometer
المجلة العلمية
Scientific Bulletin, Ain Shams University, Faculty of Engineering
الناشر
Ain shams faculty of Engineering
المجلد
19
العدد
1
الصفحات
1-8
publication.type
International
رابط البحث
Not Available
المواد المرفقة
Not Available
الملخص
In this paper, a new structure of the six-port reflectometer is presented by using
two microstrip three-section couplers. The six-port reflectometer was analyzed,
simulated and then realized on teflon substrate at the operating frquency 3.5GHz.
The six-port reflectometer was calibrated and then used to measure different
unknown complex impedances. The measured results was found to be in good
agreement with that obtained using the vector network analyzer with an error not
exceeding 4% in magnitude and 4 in phase especially in the frequency range (2.5
up to 4.5 GHZ). This bandwidth is larger as compared to the six-port
reflectometer realized by using two single-section couplers
two microstrip three-section couplers. The six-port reflectometer was analyzed,
simulated and then realized on teflon substrate at the operating frquency 3.5GHz.
The six-port reflectometer was calibrated and then used to measure different
unknown complex impedances. The measured results was found to be in good
agreement with that obtained using the vector network analyzer with an error not
exceeding 4% in magnitude and 4 in phase especially in the frequency range (2.5
up to 4.5 GHZ). This bandwidth is larger as compared to the six-port
reflectometer realized by using two single-section couplers