أعضاء هيئة التدريس - جامعة بنها
Analysis of welded joints using friction stir welding, metal inert gas and tungsten inert gas,
Engineering and Technology in India • 2016
معلومات البحث
المؤلفون
Ibrahim Sabry and A.M. Khourshid
الكلمات المفتاحية
Friction stir welding (FSW), Metal inert gas (MIG), Tungsten inert gas (TIG), Aluminum alloys
المجلة العلمية
Engineering and Technology in India
الناشر
Not Available
المجلد
7
العدد
1
الصفحات
1-7
publication.type
International
رابط البحث
Open Link
المواد المرفقة
Not Available
الملخص
n this paper, a comprehensive practical study in mechanical properties and cost welding of welded Aluminum 6061 pipe
using three different types of welds, Metal Inert Gas (MIG), Tungsten Inert Gas (TIG) and Friction Stir Welding (FSW) with
rotation speed (1800 RPM) and travel speed 4mm/min. The mechanical properties of the weld have been also investigated
using the hardness, elongation and tensile tests. The microstructure of the welds, including the nugget zone and heat affected
zone, has been compared with these three methods using optical microscopy and the basis of heat input in weld joint. The
results show that FSW improves the mechanical properties of welded joints compare Tungsten Inert Gas (TIG) and Metal
Inert Gas (MIG), respectively.
using three different types of welds, Metal Inert Gas (MIG), Tungsten Inert Gas (TIG) and Friction Stir Welding (FSW) with
rotation speed (1800 RPM) and travel speed 4mm/min. The mechanical properties of the weld have been also investigated
using the hardness, elongation and tensile tests. The microstructure of the welds, including the nugget zone and heat affected
zone, has been compared with these three methods using optical microscopy and the basis of heat input in weld joint. The
results show that FSW improves the mechanical properties of welded joints compare Tungsten Inert Gas (TIG) and Metal
Inert Gas (MIG), respectively.